There are three types of tortilla presses on the market today. They are wood, aluminum and cast iron tortilla press, and everyone is different in its own way.
The wood is printing hundreds of years. It 'easy to use and the finished wood is usually very decorative. However, they tend to be very large. One is with a surface for pressing tortillas 8-inch, usually with a total length of 11 to 12 inches. And as a square, can be as large as 12 inches by 12Inches. Storage can also be a problem. Most machines are made of pine, which produced a softer wood. Harder woods such as mesquite, maple, oak are available, but cost much more.
The aluminum is smaller than the wooden press and press closer to the size of the cast iron tortilla. He also made it very easy to aluminum. The aluminum tortilla press is the cheapest of all the machines. Because the pressure is lighter, when you press or tortilla chipsForce must be applied. It is not uncommon for a break printhead mechanism, if applied too much pressure or force. Presses are used for aluminum made in Mexico and South America, but today they are manufactured in China. The Chinese models are generally cheaper and easier to break.
The cast iron tortilla press is about the same size as the aluminum one. What makes it different from others is its weight. The cast iron tortilla press weighs about 6 pounds. This can be a bad and goodWhat. The bad thing is heavy and difficult to move. The good thing is that it is heavy and difficult to move. This is advantageous when pressed tortillas, because you stay in one place and its easy to put your weight into it and use leverage. They are heavy and very strong and does not break, and they work very well with the many pressing tortillas.
No comments:
Post a Comment